Text
Sintesis dan Karakterisasi Multi Walled Carbon Nanotubes-Seng Oksida Hasil Metode Hidrotermal untuk Aplikasi Bahan Anti Radar
INTISARI
Teknologi anti radar sangat diperlukan dalam menunjang kekuatan militer suatu negara. Teknologi anti radar dapat dibuat dengan melakukan rekayasa material, menggunakan Radar Absorbing Material (RAM) yang terdiri dari material resitif dan material magnetik. MWCNT/ZnO merupakan salah satu material yang menjanjikan sebagai anti radar. Penelitian sintesis material MWCNT/ZnO dilakukan dengan variasi persentase MWCNT sebesar 1%, 3%, 5%, dan 7%. ZnO yang digunakan dalam sintesis MWCNT/ZnO merupakan hasil sintesis hidrotermal dengan ZnSO4 dan Na2CO3 sebagai precussor. Untuk mengetahui karakteristik MWCNT/ZnO, maka dilakukan beberapa pengujian yaitu uji X-ray Difraction (XRD) untuk mengetahui struktur, uji Scanning Electron Microscope (SEM) untuk mengetahui morfologi dan uji Vector Network Analyzer (VNA) untuk mengetahui nilai serapan terhadap gelombang elektromagnetik. Hasil uji XRD menunjukkan terbentuk material MWCNT tipe hexagonal dan ZnO tipe hexagonal wurtzite. Hasil pengujian SEM menunjukkan ZnO tipe sheet. Uji VNA dilakukan pada range frekuensi X-band (8,2-12,4 GHz) didapatkan nilai reflection coefficient dan return loss. Berdasarkan nilai reflection coefficient material MWCNT/ZnO memiliki nilai serapan optimum terhadap gelombang elektromagnetik dengan persentase 3% MWCNT pada frekuensi 11,2 GHz dengan nilai RC yaitu -31,4535 dB GHz dan 5% MWCNT pada frekuensi 9,5 GHz dengan nilai RC yaitu -22,0204 dB. Berdasarkan nilai return loss, material MWCNT/ZnO memiliki nilai serapan optimum terhadap gelombang elektromagnetik dengan persentase MWCNT sebesar 1% dan 5% dengan nilai RL yaitu -21,4008 dB dan -20,7511 dB pada frekuensi 10,1 GHz.
Kata Kunci : ZnO, MWCNT, Anti radar, Reflection coefficient, Return loss.
ABSTRACT
Anti radar technology is indispensable in supporting a country's military strength. Material engineering was developed in anti-radar technology manufacture using Radar Absorbing Material (RAM) consisting of reistive material and magnetic material. MWCNT / ZnO material with a percentage variation of MWCNTs 1%; 3%; 5%; and 7% were proposed as promising material in anti-radar technology. ZnO that used in the synthesis of MWCNT/ZnO particle was resulted from hydrothermal method was prepared using ZnSO4 and Na2CO3 as precursors. X-ray diffraction (XRD) and Scanning Electron Microscope (SEM) were used to determine the structure and the morphology of the particles, respectively. Vector Network Analyzer (VNA) investigated the absorption value of electromagnetic waves. The XRD result shows that MWCNT is included as hexagonal type and ZnO hexagonal type is hexagonal wurtzite. From SEM test, ZnO particle is shown as sheet type ZnO. The VNA test on the X-band frequency range (8.2-12.4 GHz) shows the reflection coefficient and return loss values. Based on the reflection coefficient value MWCNT / ZnO material had an optimum absorption value of electromagnetic waves with a percentage of 3% MWCNT at a frequency of 11.2 with an RC value of -31.4535 dB GHz and a percentage of 5% MWCNT at a frequency of 9.5 GHz with a RC value of -22.0204 dB. Based on the return loss value MWCNT / ZnO material had an optimum absorption value of electromagnetic waves with a percentage of MWCNTs 1% and 7% at a frequency of 10,1 GHz with an RL value of -21,4008 dB GHz and -20,7511 dB.
Keywords : Radar Absorbing Material, Return loss, Reflection coefficient, MWCNT, ZnO
1384D19III | 1384 D 19-ii | Perpustakaan FSM Undip (Referensi) | Tersedia |
Tidak tersedia versi lain