Text
Rancang Bangun Pengontrol Kecepatan Pengadukan Pada Perangkat Ultrasound Assisted Extraction (Uae)Berbasis Mikrokontroler At Sam3x8e
RINGKASAN
Pada penelitian ini telah dilakukan rancang bangun sistem akuisisi data untuk mengontrol kecepatan putar dari motor DC. Pengontrolan kecepatan putar motor DC sangat diperlukan untuk memperbanyak kontak antara bahan dan pelarut agar di dapatkan larutan dengan tingkat homogenitas yang tinggi sehingga mampu menambah konsentrasi dari senyawa yang dihasilkan dari proses ekstraksi dengan menggunakan transduser ultrasonik. Sistem terdiri dari sensor magnetik efek Hall, rangkaian pengkondisian sinyal, mikrokontroler AT SAM3X8E dan driver motor. Rangkaian sensor kecepatan putaran menggunakan sensor efek Hall UGN 3503 yang dilengkapi dengan rangkaian pengkondisian sinyal yang terdiri dari rangkaian komparator dan dioda zenner pembatas tegangan 3,3V. Keluaran pengkondisian sinyal dihubungkan ke mikrokontroler ATSAM3X8E untuk mencacah jumlah putaran dan mengirimkan data tersebut ke komputer. Data karakterisasi kecepatan putaran dikalibrasi dengan kecepatan standar sehingga menghasilkan persamaan y = 0,4176x + 0,0978 dan diperoleh koefisien korelasi linier sebesar 0,9998 serta besarnya nilai kestabilan sistem akuisisi data pengontrol kecepatan sebesar 98,1%. Dari pengujian tersebut dapat disimpulkan bahwa peralatan layak digunakan.
Kata kunci : kontrol kecepatan, mikrokontroler, putaran, sensor efek Hall, korelasi linier
ABSTRACT
In this research has been done design of data acquisition system to control the rotational speed of DC motor. Controlling the rotational speed of a DC motor is necessary to increase the concentration of the compound resulting from the extraction process by using an ultrasonic transducer. At the time of extraction process is needed to multiply the contact between the material and solvent so that the solution obtained a high homogeneity level. The system consists of a Hall effect magnetic sensor, signal conditioning circuit, AT SAM3X8E microcontroller and motor driver. The series of rotation speed sensor using Hall effect sensor UGN 3503 is equipped with signal conditioning circuit consisting of a comparator circuit and 3.3V voltage divider zenner diode. The signal conditioning output is connected to the ATSAM3X8E microcontroller to count the number of turns and send the data to the computer. Data characterization of rotation speed calibrated with the standard speed to produce the equation y = 0,4176x + 0,0978 and obtained linear correlation coefficient of 0.9998 and the stability value of the system of data acquisition speed controller of 98,1%. From the test it can be concluded that the equipment is feasible to use.
Keywords: speed control, microcontroller, rotation, Hall effect sensor, linear correlation
1168D17IV | 621,99 FAI r | Perpustakaan FSM Undip (Referensi) | Tersedia |
Tidak tersedia versi lain