Text
Analisis Prositas dan Saturasi Air Dalam Integrasi Petrophysics dan Seismic Multiattributes Untuk Karakterisasi reservoir 530,41
INTISARI
Plan of Development I merupakan rencana pengembangan satu atau lebih lapangan migas secara terpadu (integrated) untuk mengembangkan dan memproduksikan cadangan hidrokarbon. Pengembangan lapangan dilakukan dengan tujuan untuk mengetahui daerah indikasi hidrokarbon berdasarkan analisis petrophysics dan mengetahui persebarannya dengan multiattributes. Dengan studi terintegrasi yang menggabungkan data seismik, data sumur (termasuk analisis petrophysics) dengan informasi geologi dan stratigrafi merupakan langkah yang diperlukan untuk mengetahui karakteristik suatu reservoir. Evaluasi formasi dan analisis petrophysics sebagai tahapan awal untuk mengkarakterisasi reservoir dengan mempelajari sifat batuan seperti kandungan lempung, porositas, dan saturasi air. Analisis multiattributes seismik digunakan untuk memprediksi sifat fisik dari batuan secara keseluruhan pada volum seismik. Berdasarkan hasil analisis petrofisika porositas target berkisar 11%-14% dan saturasi air berkisar 18%-38%, dari data statistik netpay hasil lumping memiliki nilai Net to Gross berkisar 7% hingga 40%. Metode multiattributes seismik dapat memprediksi analisis petrofisika dengan baik pada zona target.
Kata kunci : Plan of Development, Petrofisika, Seismik Multiatribut
ABSTRACT
Plan of Development I is the development plan of one or more oil and gas fields in an integrated way (integrated) to develop and produce hydrocarbon reserves. Field development was conducted in order to know the area indications of hydrocarbons based on petrophysics analysis and determine its content with multiattributes. By integrating the study of seismic data, well data (including petrophysical analysis) with geological and stratigraphic information is a necessary step to determine the characteristics of a reservoir. Formation evaluation and petrophysical analysis as an initial stage to characterize the reservoir by studying rock properties such as volume of clay, porosity and water saturation. Multiattribut seismic analysis is used to predict the physical properties of the rock as a whole in the seismic volume. Based on the results of the petrophysical analysis of the target porosity ranges from 11% -14%, from the netpay statistical data lumping results have value Net to Gross range of 7% to 40%.and water saturation ranging from 18% -38%. Seismic multiatributtes method can predict petrophysical analyzes well in the target zone.
Keywords : Plan of Development, Petrophysics, Seismic Multiattributes
1092D16IV | 1092 D 16 | Perpustakaan FSM Undip (Referensi) | Tersedia |
Tidak tersedia versi lain