Text
Analisa Kecepatan Rembesan Logam Berat Cd dengan menggunakan Metode Geolistrik, Data Hidrologi, Uji AAS pada Daerah Semarang Indah Kota Semarang
INTISARI
Penelitian mengenai identifikasi kecepatan rembesan dengan menggunakan metode geolistrik konfigurasi dipole-dipole, data hidrologi, uji AAS pada daerah Semarang Indah dengan tujuan untuk mengetahui keberadaan polutan di bawah permukaan menganlisis kecepatan rembesan dengan hukum darcy serta menganalisis hubungan kecepatan rembesan dengan konsentrasi logam berat. Oleh karena itu penelitian ini menggunakan suatu metode yaitu metode geolistrik konfigurasi dipole-dipole yang digunakan untuk mengetahui lapisan bawah permukaan dan menegtahui persebaran logam berat. Pada penelitian ini, dilakukan di bantaran sungai pada daerah Dorowati dalam Kelurahan Tawang Mas dan Tanggul Mas kelurahan Prindikan Kidul. Pada lapangan E memiliki tiga lintasan . pada lintasan pertama hingga ketiga , nilai resistivitas yang mendominasi 1,53 – 17,7 m yang diprediksi sebagai lempung dari kedalaman 1 meter hingga 7 meter. pada lapangan F memiliki tiga lintasan, pada lintasan pertama hingga terakhir memiliki nilai resistivitas yang dominan antara 1,37 – 17,4 m yang diprediksi sebagai lempung. pada nilai resistivitas yang rendah merupakan persebaran polutan. nilai resistivitas rendah berdampak pada nilai konduktivitas tinggi. Pada lokasi E pada lintasan pertama hingga ketiga nilai resistivitas 0,762 – 5,42 m dapat diprediksi sebagai polutan. Pada lokasi F pada lintasan pertama hingga ketiga nilai resistivitas 1,81 – 4,58 m dapat diprediksi sebagai polutan. berdasarkan hasil uji AAS kandungan logam berat yang berada di air sungai dan air sumur adalah Cd atau cadmium dengan konsentrasi antara 0,096 – 0,108 mg/L. berdasarkan nilai resistivitas yang rendah , perbedaan ketinggian anatara sumur dan sungai dan hasil uji AAS membuktikan bahwa terjadi rembesan dari sungai ke sumur warga sehingga didapatkan nilai kecepatan rembesan sebesar anatara 2,84 x 10-10 cm/s -1,00 x 10-7 cm/s. Kecepatan rembesan dipengaruhi oleh jarak antara sungai dan sumur serta perbedaan ketinggian dari sungai ke sumur.
Kata Kunci: Sungai kaligarang, resistivitas, konfigurasi dipole-dipole, uji AAS, kecepatan rembesan
ABSTRACT
Research on the identification of seepage velocity using the geolistrik method of dipole-dipole configuration, hydrological data, AAS test in Semarang Indah area in order to know the existence of pollutant below surface analyze seepage velocity with law of darcy and analyze the relation of seepage velocity with heavy metal concentration. Therefore, this research use a method that is geolistrik method of dipole-dipole configuration which is used to know the subsurface layer and to know the distribution of heavy metal. In this research, carried out in the area along the river in the village of Tawang Mas Dorowati and Dikes Mas Prindikan Kidul village. In addition, AAS (Atomic Absorbtion Spectrophotometery) test, the sample used in this test with water is river water and well water. This method of atomic absorption spectrophotometry is one of the analytical methods that can be used to determine the elements in a material can even analyze the sample in small quantities, because this method has a very high sensitivity, precision and selectivity. On field E has three paths. In the first three tracks, the value of resistivity that dominates 1.53 m to 17.7 m predicted as clay from a depth of 1 meter up to 7 meters. In the field F has three tracks, the first track to the last value of the dominant resistivity between 1.37 m to 17.4 m predicted as clay. At low resistivity value is the spread of pollutants. Low resistivity values have an impact on high conductivity values. At location E on the first to third path the resistivity value of 0.762 m to 5.42 m can be predicted as a pollutant. At location F on the first to third path the resistivity value of 1.81 m to 4.58 m can be predicted as a pollutant. Based on AAS test result of heavy metal content in river water and well water is Cd or Cadmium with concentration between 0,096 mg/L to 0,108 mg/L. Based on the low resistivity value, the height difference between the wells and the river and the AAS test result proves that there is seepage from the river to the residents' wells so that there is a seepage velocity value of 2.84x10-10 cm/s to 1.00x10-7 cm/s. The seepage velocity is affected by the distance between the river and the well and the height difference from the river to the well.
Keyword : River kaligarang, resistivity, dipole-dipole configuration, AAS test, seepage velocity.
1178D17IV | 532,37 BET a | Perpustakaan FSM Undip (Referensi) | Tersedia |
Tidak tersedia versi lain